E-mail: support@pickaudio.es
Shopping Cart 0
€0.00

Schoeps SuperCMIT

€3,810.29 €3,149.00
Availability (5-10 days)
SKU
supercmit
Schoeps SuperCMIT Microphone

Description

The Schoeps SuperCMIT Digital Shotgun Microphone incorporates a unique design and approach to minimizing extraneous noise, increasing range and retaining the transparency and integrity of the source audio. The SuperCMIT features a dual output signal, coupled with digital signal processing for excellent noise diffusion and pristine transparency.

In addition the microphone features a low-frequency roll-off switch, high frequency gain switch and increased directivity switch for maximizing range. The Schoeps SuperCMIT is at home on a boompole or pistol grip mount, and is very well suited for ENG / EFP, broadcast applications, audio for video and motion picture, sound design applications and more.

  • - New type of digital shotgun microphone with increased directivity, based on Shoeps' extremely successful analog model CMIT 5
  • - Diffuse sound is suppressed to an extraordinary degree
  • - Completely new operating principle with two transducers
  • - Uses digital signal processing (DSP) algorithms from Illusonic
  • - Two-channel output, with SuperCMIT signal in channel 1 and (direct, single-transducer) CMIT signal in channel 2
  • - Schoeps sound quality: transparent sound

Practice

Especially where diffuse noise like street noise, wind noise, audience noise or room noise interfere with the recording, the SuperCMIT is a problem solver. While the direct sound is recorded without colorations, the noise is eliminated, that is, its level is significantly reduced - down to the lowest frequencies! This cannot be achieved even by a long shotgun microphone. Therefore, the SuperCMIT is ideally suited e.g. for difficult film sound recordings or for sports applications. The SuperCMIT also increases the range of shooting in indoor areas.

Technical Specifications

Pickup pattern Supercardioid / lobe-shaped
Frequency range 40 Hz - 20 kHz
Sensitivity -31 dBFS at 1 Pa
Equivalent noise level (A-weighted)

14 dB (channel 1)

16 dB (channel 2)

Equivalent noise level (CCIR)

27 dB (channel 1)

28 dB (channel 2)

Signal-to-noise ratio (A-weighted)

80 dB (channel 1)

78 dB (channel 2)

Maximum sound pressure level (THD < 0.5 %) 125 dB-SPL
Latency period

channel 1: 1.6-6.25 ms (frequency-dependent)

channel 2: 1.6 ms

High shelf filter switchable, +5 dB at 10 kHz
Low cut filter switchable, 80 Hz, 18 dB/oct.
Output impedance 110 Ω
Maximum cable length > 200 m
SCHOEPS RFI Shield Yes, highest immunity
Powering standard / Valid range AES42 / >6 V
Current consumption 170 mA
Output

XLR-3M, digital: AES42 Mode 1, 48 kHz

Channel 1: SuperCMIT

Channel 2: Unprocessed shotgun

Length 280 mm
Diameter 21 mm
Weight 112 g
More Information
Related documents:

CMIT datasheet

Write Your Own Review
You're reviewing:Schoeps SuperCMIT
Your Rating

Stock Messages
Stock: Item is available in our warehouse ready for inmediate delivery.
On Demand: Item served upon request. Shipment deadlines are approximated.
Temporarily Out of Stock: Item out of stock but usually in stock. Shipment time is less than 10 days.

Delivery Times
Delivery times are approximate, items are usually delivered before these times. Once your order you will receive an e-mail giving you a more accurate estimated time of delivery. If you would like to know the delivery time before placing an order, please e-mail pickaudio@pickaudio.es indicating references and quantities to be purchased. You will receive a reply in 24/48h.

Upsell Products
Compare Products
You have no items to compare.