E-mail: support@pickaudio.es
Shopping Cart 0
€0.00

Remote Audio SPEAKEASY R1

€517.88 €428.00
In stock
Only 1 left
SKU
SPKEZR1
  • Self-contained, stereo, 12VDC-powered speaker system
  • Single rack space
  • Dual XLR and stereo 1/4” input
  • Front headphone jack
  • Master volume control
  • Input monitoring selector
  • Self-contained, stereo, 12VDC-powered speaker system
  • Single rack space
  • Dual XLR and stereo 1/4” input
  • Front headphone jack
  • Master volume control
  • Input monitoring selector

The SPEAKEASY R1 is a self-contained, stereo, 12VDC powered speaker system built into a single rack space. Its low current draw (55mA at idle) and compact light-weight enclosure make the SPEAKEASY R1 ideal for remote audio production, yet the R1 has the volume needed for use in facility equipment rooms.

The R1's line level inputs are for standard line-level signal ratings of -10dbV to +4dBu, or the signal from a stereo headphone jack. Two XLR inputs allow for a stereo input signal. In addition, an XLR / ¼" combo jack allows for a stereo input signal on the 1/4" connector, allowing a single cable to feed the SPEAKEASY R1. This provides a convenient way to insert the SPEAKEASY R1 into an existing cart setup with a headphone feed from a mixer using a ¼" TRS to TRS cable. Two DC input connectors are provided for convenience: a 4-pin XLR (Pin 4: V+, Pin 1: Gnd) and a 2.1mm coaxial-type DC jack (center pin positive). The SPEAKEASY R1 will operate on 9 - 20VDC. An external 12VDC "wall-wart" power supply (Remote Audio PS12V1.5) is available.

The main power push-button is located on the front of the SPEAKEASY R1, and will illuminate when pressed and sufficient power is present at either of the DC input jacks. The main volume control and source selector knob apply to the main speakers, as well as the headphone connector. When headphones are inserted into the front ¼" jack, the main speakers are muted. The source selector allows monitoring of: Left input only; Right input only; Stereo; or a summed Mono version of the Left and Right inputs.

Specifications

Dimensions 19 x 1.75 x 4.25 inches (1 Rack Unit)
Weight 2.6 lbs
Idle Power Drain 55mA @ 12VDC
Power Output 7.5w per channel @ 8 Ohm nominal speaker impedance
Maximum SPL 92dB (1kHz @ 1m)
More Information
Related documents:

Speakeasy R1 datasheet

Write Your Own Review
You're reviewing:Remote Audio SPEAKEASY R1
Your Rating

Stock Messages
Stock: Item is available in our warehouse ready for inmediate delivery.
On Demand: Item served upon request. Shipment deadlines are approximated.
Temporarily Out of Stock: Item out of stock but usually in stock. Shipment time is less than 10 days.

Delivery Times
Delivery times are approximate, items are usually delivered before these times. Once your order you will receive an e-mail giving you a more accurate estimated time of delivery. If you would like to know the delivery time before placing an order, please e-mail pickaudio@pickaudio.es indicating references and quantities to be purchased. You will receive a reply in 24/48h.

Upsell Products
Compare Products
You have no items to compare.