Description
The shotgun microphone MiniCMIT offers the characteristics of a CMIT 5 in more compact form. The MiniCMIT, CMIT 5 and SuperCMIT (ch2) have identical frequency response curves. Furthermore, the MiniCMIT and CMIT 5 have circuitry with similar characteristics, such that the microphones can be interchanged without altering the sound.
Vídeos
Technical Specifications
Pickup pattern | Supercardioid / lobe-shaped |
Frequency range | 60 Hz - 20 kHz |
Sensitivity | -35 dB (V/Pa), 17 mV/Pa |
Equivalent noise level (A-weighted) | 14 dB |
Equivalent noise level (CCIR) | 24 dB |
Signal-to-noise ratio (A-weighted) | 80 dB |
Maximum sound pressure level (THD < 0.5 %) |
130 dB-SPL (P48) 115 dB-SPL (P12) |
Maximum output voltage |
1 V (0 dBV) with 2 kΩ load |
High shelf filter | switchable, +5 dB at 10 kHz |
Low cut filter | fixed, 70 Hz, 24 dB/oct. |
Minimum recommended load impedance | 2 kΩ |
Output impedance | 100 Ω |
Maximum cable length | > 100 m |
SCHOEPS RFI Shield | Yes |
Powering standard / Valid range |
|
Current consumption | 2.3 mA (P48) |
Common mode rejection ratio (at 1 kHz) | > 55 dB |
Output | XLR-3M, analog, 1 channel |
Length | 151 mm |
Diameter | 21 mm |
Weight | 78 g |
Related documents: |
---|
Stock Messages
Stock: Item is available in our warehouse ready for inmediate delivery.
On Demand: Item served upon request. Shipment deadlines are approximated.
Temporarily Out of Stock: Item out of stock but usually in stock. Shipment time is less than 10 days.
Delivery Times
Delivery times are approximate, items are usually delivered before these times. Once your order you will receive an e-mail giving you a more accurate estimated time of delivery. If you would like to know the delivery time before placing an order, please e-mail pickaudio@pickaudio.es indicating references and quantities to be purchased. You will receive a reply in 24/48h.