The CTP Systems Prehear D4080 is a Dante-enabled production pre-listen unit that can also operate as a standalone analogue device. It can be used in Dante mode, analogue mode or with both systems at the same time.

It provides ten inputs and two outputs on both the network and analogue sides. Each input can be routed left, right or to both channels, with its own volume control, cut button and signal-presence indicator.

Features

• Simultaneous Dante and analogue operation with no mode switching required.
• Dante and analogue sources are mixed when both feed the same input.
• Left, right or both-channel selection for every input.
• Two internal loudspeakers with protection limiters and a stereo headphone output.
• Analogue inputs and outputs on XLR connectors.
• Primary and secondary RJ45 ports for Dante redundancy or switch operation.

Specifications

• Dante inputs/outputs: 10/2.
• Analogue inputs/outputs: 10/2.
• Sample rates: 44.1 kHz and 48 kHz.
• Power: 100–240 V AC, 50/60 Hz.
• Consumption: less than 17 W with the loudspeakers muted; less than 36 W at full volume with a 1 kHz tone.